Description
RGB Fan Hub ARGB Cable Splitter Hub Adapter Computer Desktop PC Accessories 10-in-1 for ASUS/MSI/GIGABYTE/ASRock Motherboards
Features:
- Support for ASUS, MSI, GIGABYTE, ASRock motherboards (D-RGB 5V/3Pin light control interface) to be controlled by the motherboard, and the lights can be synchronized with other D-RGB products.
- Efficient wire management. Five sets of fan sockets on the left and right for easy installation, creating a clean and tidy computer space.
- Comes with a 52cm motherboard cable. The length of the line is 52cm, so players no longer have to worry about short lines.
- The hub is a 5V 3PIN SATA/large 4D power port version. Specifically, it depends on the motherboard interface and the number of pins of the device interface you are using. You can purchase accordingly. You cannot connect a four-pin device or a four-pin hub to a three-pin lighting device.
- Multi-interface, easy installation. Supports up to 11 ARGB interfaces, say goodbye to the problem of insufficient interfaces.
- Widely compatible. Standard 5V 3-pin interface, compatible with different motherboard brands, universal standard 5V 3-pin ARGB interface, no need to worry about compatibility issues.
- Comes with adhesive, easy to install. The paste is stable, the double-sided adhesive is fixed, the installation is very convenient, and the foam pad on the back can also play the role of insulation protection.
Specification:
- Category: RGB Fan Hub
- Number of fan ports: 10
- Power interface: SATA interface, large 4D power interface (large 4PIN D-type interface (4 pins side by side) (optional)
- Interface: 5V/3PIN
- Interface cable length: about 52cm/20.47 inches
- Process: gold plated
- Fixing type: 3M adhesive support
- Material type: 3mm acrylic sheet
- Product size: about 1392cm/5.123.540.79 inches
- Product packaging: electrostatic bag
- Gross product weight: about 50g
Note: This product is not an adapter, it is just a hub, it can only be used when the motherboard interface is insufficient, the device interface without the adapter function must be the same as the motherboard with the same number of interface pins before it can be used.
