High quality PETG rigid tube diameter 10 / 14mm length 500mm. The manufacturer reports that the external diameter is slightly greater than 14mm and for this reason recommends using these pipes in combination with their 10 / 14mm fittings for the best possible result.

All corners must be rounded to prevent damage to the orings. It is also advisable to wet the rubber to facilitate insertion.

The material used is PETG and requires lower processing temperatures than acrylic. The bending of these tubes is therefore easier.

Attention: For bending do not use silicone ropes with an exact diameter of 10mm (for example XSPC rope or article 05311) but use ropes with a slightly smaller diameter (Alphacool, Bitspower, etc)